F14115/16 EAGLE A3 Super II V2 6-Axis Gyro & Flight Controller Stabilizer Half / Full Set - Programe Card for RC Airplan
1
  • F14115/16 EAGLE A3 Super II V2 6-Axis Gyro & Flight Controller Stabilizer Half / Full Set - Programe Card for RC Airplan
  • F14115/16 EAGLE A3 Super II V2 6-Axis Gyro & Flight Controller Stabilizer Half / Full Set - Programe Card for RC Airplan
  • F14115/16 EAGLE A3 Super II V2 6-Axis Gyro & Flight Controller Stabilizer Half / Full Set - Programe Card for RC Airplan
  • F14115/16 EAGLE A3 Super II V2 6-Axis Gyro & Flight Controller Stabilizer Half / Full Set - Programe Card for RC Airplan
2
views: 640

F14115/16 EAGLE A3 Super II V2 6-Axis Gyro & Flight Controller Stabilizer Half / Full Set - Programe Card for RC Airplan

Rate:
0.0000/5

( reviews )

Item NO.: F14115-F14116 MOQ: 0
 Type:
 Price:
$18.48 $21.74 (15% OFF)
Qty:
      $18.48   Calculate Shipping Cost


EAGLE A3 Super II V2 6-Axle Gyro & Flight Controller Stabilizer Half / Full Set - Programe Card for RC Airplane
There are 2 sets optional,please choose the one you request:
 
No Program Card Half Set:
A more economical solution for you.
 
Including: A3 Super 2 Main Controller × 1,
Receiver Cable(15cm) × 3,
Data Cable(40cm) × 1,
USB Adapter × 1,
3M Double-sided Tapes × 2
20150723_174526_003
A3 Super II Full Set
 
A program card can help you setting up all parameters of the controller more easily, especially when you are in the field.
 
Including: A3 Super 2 Main Controller × 1,
Program Card × 1,
Receiver Cable(15cm) × 3,
Data Cable(40cm) × 1,
USB Adapter × 1,
3M Double-sided Tapes × 2
20150723_174526_004
20150723_174526_00520150723_174526_006


 
Features:
THIS IS THE LATEST A3 SUPER II (VERSION 2)
32-bit MCU, 3-axle gyroscope and 3-axle accelerometer.
One-click rescue, One-click hover.
6 flight modes: off, normal, 3D, auto-balance, auto-hover and user defined mode.
2 stick control modes: Manual Mode(MM) and Auto Mode(RR/AR).
Various wing types: 1AIL+1ELE, 2AIL+1ELE, 1AIL+2ELE, 2AIL+2ELE, delta-wing and V-tail.
Separated gain setting and gain rate for each flight mode, remote master gain control.
Compatible with all standard receivers or Futaba's S.Bus/S.Bus single-line receiver.
Up to 333Hz servo operating frequency, compatible with all analog and digital servos.
5-level response rate setting allows you to use it on gas-powered planes.
H.V(7.4V) receivers and servos supported.
Flat or upright mounting orientations.
A program card helps you setting up the controller more easily in the field.
New designed config GUI allows you upgrade the firmware online
Flight Mode
 
1 Gyro Off Mode
Choose this mode to disable the gyros for all channels. The plane will be completely under the control of the radio. The plane will go back to its previous performance when operating it in this mode. Usually it is only used to test.
 
2 Normal Mode
Normal mode is the most basic application of the gyro. In this mode, the gyro will sense angular velocity on each axis and make a momentary reaction. The normal mode is suitable for all types of fixed-wings, it can effectively improve the stability of your plane specially on a windy day.
 
3.3D AVCS Mode
The AVCS mode is an advanced application of the gyro. By adding an integral algorithm to the gyros, the controller will try to lock the plane to its previous attitude if there is no command sent from the transmitter in a flight. This mode can effectively help you to accomplish such hard actions as hover and knife edge. But this mode is designed especially for the 3D planes, it's not suitable for the planes those not designed for 3D flight.
 
4 Auto-balance Mode
The auto-balance mode is designed for the new beginners or the FPV applications. When operating in this mode, the controller will command the plane to maintain level flight automatically when you release the sticks. When switch it to this mode from any other modes in an emergency, the plane will recover to the level flight automatically, which we call "one-click rescue".
 
5 Auto-hover Mode
The auto-hover mode is another form of the self balance ability of the controller. The only difference is that the correction from the gyro will be applied to both pitch and yaw axes, to keep the plane always vertical. When switch to this mode, the plane will lift its nose and start to hover automatically, which we call "one-click hover".
 
6 User Defined Mode
This mode allows you to select different mode for each axis, from normal , 3D or gyro off mode.
 
Stick Control Mode
 
Manual Mode(MM)
When manual mode is chosen, the sticks are used to control the surfaces directly as usual. That is, there is no rotation rate or tilt angle locking and limitation when you move the sticks. All the servos will be completely under the control of the radio. It's more obvious to the users because you can see the servos move following the sticks as you expected. The plane will maintain its original control behavior when operating it in this mode.
 
Auto Mode(RR/AR)
When using this mode, the controller will take over the control of all servos. The sticks are used to control the rotation rate (RR) on each axis when flying in normal or 3D mode, or the tilt angle rate (AR) on each axis when flying in auto-balance or auto-hover mode. The max rotation rate and max tilt angle can be set in the program card or the config software. In this mode, the controller will handle the position of the surfaces based on the actual rotation rate or tilt angle of the plane intelligently. This is why the movement of the servo will become different from the manual mode.
 
MM: Stick controls the servo directly.
RR: Stick controls the rotation rate on each axis.
AR: Stick controls the tilt angle rate on each axis.
Whatever the setting of control mode is, the stick is always used to control the servo directly when operating in gyro off mode or the gyro of the corresponding axis has been disabled.
Whatever the setting of control mode is, the stick is always used to control the rotation rate on each axis when operating in 3D mode.
 
HTB13wEFIFXXXXbgaXXXq6xXFXXXW
Connection
 
The new A3 Super has 7 separated input channels and 5 output channels. You can use a standard receiver or a single-line receiver such as Futaba's S.Bus/S.Bus 2.
 
GUI
The new designed GUI helps you accomplish all settings of the controller and upgrade the firmware online.
 
HTB1SJcDIFXXXXaiXVXXq6xXFXXXN
Specifications:
EAGLE Aeroplane Flight Controller/ Stabilization System A3 Super II W/Programe card V2
Main Controller: 32-bit MCU
Sensor: 3-axle gyroscope and 3-axis accelerometer
Gyroscope Scale Range: ±2000 dps
Accelerometer Scale Range: ±4g
Input Signal: Standard PPM with center point 1520uS, or S.Bus serial data
Output Signal: PWM max frequency 333Hz, 1520±500uS
Input Voltage: 4.8V ~ 7.4V
Operating Temp: -10 Celsius ~ 50 Celsius
Size: 43×27×14mm
Weight: 10g (excluding wires)


No comment
Total 0 records, divided into1 pages. First Prev Next Last
View History
Recent Sales